Dima Fix Glue

The Dimafix Pen (90ml) is a new product formulated based on the Dimafix Spray, offering the same strong adhesion properties but in a convenient liquid pen format. It is designed for up to 100 uses, though this may vary depending on bed size. The product is water-soluble, making it easy to clean, and works across a wider range of temperatures than the Dimafix Spray, which helps the print detach more quickly. It contains no gas and is environmentally friendly, with a pleasant scent during use. After use, ensure the pen is properly closed and stored.

Usage Instructions:

1. Shake the bottle for a few seconds before applying.
2. Ensure the bed is cold before applying.
3. Apply the liquid to the bed.
4. Allow a few seconds for the surface to dry, then heat the bed.
5. Refer to the recommended temperatures for each Dimafix formula.
6. The product activates at temperatures above 65ºC/150ºF.
7. The printed piece will stay adhered while the bed remains over 85ºC/185ºF.
8. In case of issues during printing, avoid removing the piece. If the print hasn’t detached, reheating the bed may help it stick and recover your work.
9. Once printing is complete, the piece will detach easily when the bed cools below 50ºC/122ºF.
10. Wait for the bed to cool before removing the piece.